Amicom Orion Rom

AMICOM ORION [UNTESTED]

FIRMWARE/STOCK ROM TO UNBRICK YOUR PHONE

This firmware is for Amicom Orion, this is a rom dump only and I haven't tested yet.

Do this at your own risk!

---

You can fix the following issue in your phone:

1. Bootloop
2. Damaged System UI
3. Dead phone but it is detected in computer
4. Remove Gmail Account / Password / Pattern Lock (Alternative Way)

Requirements:

• Windows Computer
• USB Cable
• Internet (for downloading)
• Brain (If you don't have one, borrow to your neighbor)

Downloads:

Rom: https://mega.nz/#!L0Ek1QDJ!iShWpDu-Z63v0wGxRFK5bRyQEMZRn_sezhNtCuBMxN0

Driver (Manual): http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip

Driver (Auto): http://www.uploadmb.com/dw.php?id=1420616416

Flash tool: http://spflashtool.com/

Other Guides:

Driver installation (manual): 

http://www.teamandroid.com/2016/02/09/download-mediatek-mt65xx-usb-vcom-drivers-installation/

Driver installation (auto):

Open the install.exe then it will automatically install the driver.

Notes:

• Use WinRar to extract the firmware and flash tool
• Extract the files to your desired folder
• If you encounter error in flashtool, use different version of it.
• Please report dead links

---

Let's get started!

Flashing:

1. Extract SP Flash tool
2. Extract ROM
3. Launch Flash tool.
4. Click on the Download tab
5. Load Scatter file from the ROM (see Picture 1 below)
6. Click on the Download Button (the one with the green download icon)
7. Turn off the phone
8. Insert the cable to the computer (do not insert yet to phone)
9. Now, Press and Hold Volume Up Button if the phone (do not release)
10. While holding it, insert now the cable to the phone
11. BTW, if it is not detected, you could try Volume Down button
12. If the phone is detected and the progress bar is moving, then you can release it
13. So, just wait until it reach 100% and show a dialog box with a check mark
14. And Reboot, you're done!

Picture 1

Fixing IMEI

You will notice that the phone cannot get signal. There's two method to fix that and those two method will require you to root your phone.

Method 1 (PC):

1. Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. 
3. Download MTKDroidsTool.
4. Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC) 
5. In your PC -- Open MTKDroidstool (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
6. Still in Mtkdroidstool -- Click ROOT
7. In your phone -- A pop up dialogue will appear, just grant or allow it.
8. In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool
9. Enter your original IMEI (you can find it behind the battery of the phone)
10. Click Replace
11. Reboot your phone

Method 2 (Without PC):

1. Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. 
2. Download Chamelephon
3. Grant Permission
4. You can generate or enter your original IMEI
5. Apply
6. Reboot

Blog based on: firmwares2you

I hope this tutorial help you. 

Please drop a comment if something is not clear to you.